Quick Troubleshooting Tips for Your Central Vacuum

April 24, 2018 Leave your thoughts

A central vacuum system in Palm Beach County, FL makes cleaning your home much easier and much faster. However, it can be irritating when it loses efficiency or just doesn’t work. There are several things that might be wrong with your central vacuum system. Here’s a look at some ways to troubleshoot before calling a certified technician for central vacuum repair:

  • Check the canister: First things first, make sure to check the canister. If it’s full, you’ll need to empty it before the central vacuum’s performance can improve. You’ll also want to make sure the canister is attached correctly. Sometimes the latches that hold it in place can be loose or get damaged.
  • Replace dirty filters: One of the most important parts of a central vacuum system in Palm Beach County, FL is the filter. If it’s too dirty, you’ll run into problems with the vacuum’s power and could run into more problems with clogs.
  • Look for clogs: If you do get a clog, you’ll have to get rid of it. If you think there’s a clog, vacuum up a coin and see if it reaches the central unit. If it doesn’t reach, you have a clog. Poor suction usually means the clog is in the hose, while good suction means it’s likely in the tubing system. If the clog’s not in the hose, you’ll probably need to contact a professional for central vacuum repair in Palm Beach County, FL.
  • Be on the lookout for leaks: The most common cause of lower suction power is an air leak. There are many ways for an air leak to develop, including valves that need to be replaced, cracked hoses or tubing, and hoses that are not hooked up properly. To test this, detach the tubing system from the power unit and block its intake. Turn on the power and see if air is still coming out. If it is, then there’s a leak in the power unit. If not, reconnect the power and tubing and close all inlet valves. Turn on the power and listen for hissing to find the leak. A simpler approach is to call a certified technician in central vacuum repair in Palm Beach County, FL to quickly identify the problem and fix it.
  • Be careful around water: Central vacuum systems in Palm Beach County, FL aren’t meant to deal with much water. If you do vacuum up some liquid, suck a few paper towels up to try and help dry out the hoses and lines. Then clean any dampness in the main unity. After that, let the system run for 30 to 40 minutes to dry out. You should then replace the inlet valve or vac pan where the water came from. Otherwise you could be dealing with major damage later down the line.

These tips can help you keep your central vacuum system running in top condition. Don’t be afraid to call a central vacuum repair professional, like us. We here at Central Vacuum Connection have been serving customers in Palm Beach County, FL for more than 40 years. We are available to schedule appointments and free consultations. We’ll help you figure out what’s wrong with your central vacuum system and work to fix it as efficiently as possible. Get in touch today to learn more!

Categorised in: ,

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *